Our Products

Basic Electrical Lab

OHM’S LAW APPARATUS
Objective: To Verify Ohm’s Law & hence find the unknown resistance.
Complete with in-built One analog rectangular Voltmeter 0-6V & One 0-600mA analog rectangular Ammeter, A unknown resistance, Potentiometer and built in Regulated Power Supply 0-6V, 750mA & Operating Manual.



RESISTANCE IN PARALLEL & SERIES
Object: To find the resultant resistance when resistance are connected in parallel.
Complete with one analog Round voltmeter & one analog round ammeter, external DC Regulated Power Supply terminals of 10V,500mA, Patch Cords & Manual .



VERIFICATION OF KCL AND KVL
FEATURES: Instrument comprises of DC Regulated Power Supply 0-15VDC/250mA, two round meters for voltage & current measurement, Combination of resistances mounted on front panel





LCR IMPEDANCE CIRCUIT APPARATUS
OBJECTIVE: To calculate AC Power factor of LCR circuit when connected in series & subjected to AC voltage.
FEATURES: Instrument comprises of variable AC Power Supply 0-15 VAC, 2 AC moving coil meters to measure Voltage & current, 2 Resistance, 2 Capacitors & 1 Inductance connected inside & connections brought out at terminals



TO MEASURE POWER & POWER FACTOR OF A 3 PHASE CIRCUIT
Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter = 500v
• Ammeter = 6a
• Wattmeter = 2000w
• Auto transformer 3 phase 5a
• Resistive load 3kw
• Capacitive load 3kw
• Inductive load 3kw



VERIFICATION OF THEVININ'S THEOREM
OBJECTIVE: To verifies Thevenin's Theorems.
FEATURES: Instrument comprises of One Fixed Output DC Regulated Power Supply of 12 V at 250mA current, Two moving coil meters, Circuit Printed on the front panel.



STUDY OF NORTEN’S THEOREM
OBJECTIVE: To verifies Norton's Theorems.
FEATURES: Instrument comprises of One Fixed output DC Regulated Power Supply of 12V at 250mA current, two moving coil meters, Circuit Printed on the front Panel



VERIFICATION OF SUPERPOSITION THEOREM
OBJECTIVE: To verifies Superposition's Theorems.
FEATURES: Instrument comprises of Two Fixed output DC Regulated Power Supplies of 12V & 5V at 250 mA current. Three moving coil meters, circuit diagram printed on the front panel



VERIFICATION OF MAXIMUM POWER TRANSFER THEOREM
OBJECTIVE: To verifies Maximum Power Transform Theorems.
FEATURES: Instrument comprises of One Fixed output DC Regulated Power Supply of 12V at 250mA current, Two moving coil meters, Circuit Printed on the front panel



DEM LAB
STUDY OF TTL LOGIC GATE (6 IN 1)
OBJECTIVE: To verify the truth table for TTL AND, OR, NOT, NAND, NOR, EX-OR gates.
FEATURES: Instrument comprises of 5V/150mA DC Regulated Power Supply for logic ‘1’ & logic ‘0’. With Instruction Manual and Patch Cords.





DIGITAL HALF ADDER & SUBTRACTOR
OBJECTIVE: To study the 4 Bit digital half adder & subtractor using IC 7483
FEATURES: Instrument comprises of DC Regulated Power Supply 5V/150mA, 4 Logic inputs selectable using SPDT switches, 4 output LED indicators, circuit diagram printed & connections brought out at sockets on the front panel.



STUDY & VERIFY TRUTH TABLES OF JK & JK MASTER SLAVE FLIP FLOP
OBJECTIVES: To verify truth tables of ‘JK’ & ‘JK Master slave’ flip flops using IC 7472 & IC 7476. FEATURES : Instrument comprises of DC Regulated Power Supply 5VDC/150mA, 4 SPDT switches provided for selecting logic ‘1’ & logic ‘0’, 1Hz monoshot clock pulse, two output indicators, Circuit diagram for ‘JK’ & ‘JK Master slave’ flip-flops are printed & connections for input & outputs brought out at the sockets on the front panel.



STUDY OF 4 BIT COUNTERS (SYNCHRONOUS & ASYNCHRONOUS)
OBJECTIVE : To Study and verify the truth tables of two Bit, four Bit up, down and Modulo Asynchronous (Ripple) counters using IC 7476, Ring & Johnson Counter using IC 7476, four Bit Up Down and Programmable Synchronous counter using IC 74193, Decade Up-Down Counter using IC 74190.
FEATURES : Instrument comprises of DC Regulated Power Supply 5VDC/150mA, 1Hz monoshot clock pulse, Two output indicators, symbolic diagram for 4 ‘JK ‘ flip-flops Printed & connections for inputs & outputs brought out at sockets on the front panel.



DIGITAL TO ANALOG (D/A) CONVERTOR
OBJECTIVE: To study Digital to Analog convertor.
FEATURES : Instrument comprises of DC Regulated Power Supply 5VDC/150mA, ±15VDC/150mA, 1 Voltmeter Digital, 4 SPDT switches provided for selecting logic ‘1’ & logic ‘0’, one output indicators, Circuit diagram printed on the front panel.



ELECTRONIC LAB
PN JUNCTION DIODE CHARACTERSTICS APPARATUS
OBJECTIVE: To study Forward & Reverse Characteristics of PN Junction Diode.
FEATURES :Instrument comprises of two DC Regulated Power Supplies 0-3VDC/150mA & 0-30 VDC/150mA, two dual range round meters for voltage & current measurement, PN Junction Diodes mounted behind the panel, connections of Supplies, Meters & Diodes brought out at 4 mm Sockets



ZENER DIODE CHARACTERISTICS APPARATUS
OBJECTIVE: To Study Forward & Reverse V-I Characteristics of Zener diode.
FEATURES : Instrument comprises of DC Regulated Power supply 0-2/20VDC/150mA, two round meters for voltage & current measurement, 2 Zener Diodes mounted behind the panel, connections of Supplies, meters & Zener Diode brought out at 4mm Sockets.



HALF WAVE/FULL WAVE & BRIDGE RECTIFIER APPARATUS
OBJECTIVE: To study Efficiency & Ripple factor in case of half wave, Full wave & Bridge rectifier on application of load & filters.
Features: Instrument comprises of AC Power Supply, 2 meters to measure Output Voltage & Output current, 4 PN Junction Diodes, Filter Circuit Kit, load Resistances selectable using band switch.



TRANSISTOR CHARACTERISTICS APPARATUS
OBJECTIVE: Input & Output Characteristics of Common Emitter PNP & NPN Transistors Input & Output Characteristics of Common Base PNP & NPN Transistor.
FEATURES: Instrument comprises of Two DC Regulated Power Supplies 0-20VDC/150mA & 0-2/20VDC/150mA, four round meters for voltage & current measurement, one PNP & one NPN Transistor mounted behind the panel, connections of Supplies & Transistors brought out at 4mm Sockets.



TWO STAGE RC COUPLED TRANSISTOR AMPLIFIER
OBJECTIVE: To study Frequency Response two stages RC coupled Common Emitter Transistor Amplifier.
FEATURES: Instrument comprises of DC Regulated Power Supply, Circuit diagram is printed, components mounted on the front panel.





FET CHARACTERISTICS APPARATUS
OBJECTIVE: To plot static & Transfer Characteristics.
FEATURES: Instrument comprises of Two DC Regulated Power Supplies 0-15VDC/150mA & 0- 3VDC/150mA, three round meters for voltage & current measurement, FET BFW10 mounted behind the panel.



COMMON COLLECTOR TRANSISTOR AMPLIFIER
OBJECTIVE: To study Frequency Response, Input Impedance & Output Impedance of common Collector Transistor Amplifier.
FEATURES: Instrument comprises of DC Regulated Power Supply, Circuit diagram is printed, components mounted on the front panel.





HARTLEY OSCILLATOR
OBJECTIVE: To study the Frequency and Wave shape generated by a Hartley Oscillator.
FEATURES: Instrument comprises of 12V DC Regulated Power Supply, circuit diagram printed & components mounted on front panel.





RC PHASE SHIFT OSCILLATOR
OBJECTIVE: To study the Frequency and Wave shape generated by Phase Shift Oscillator.
FEATURES: Instrument comprises of 12V DC Regulated Power Supply, Circuit diagram printed & components mounted on front panel





CLIPPING & CLAMPING CIRCUIT APPARATUS
Objective: To study effect of Positive & Negative Clipping & Clamping on Sine Wave.
Features: Instrument comprises of DC Regulated Power Supply 0-5 VDC/150mA, Circuit diagram for Clipping & Clamping Printed, components placed inside & connections brought out at 4mm Sockets



BISTABLE MULTIVIBRATOR USING TRANSISTOR
OBJECTIVE: To study Bistable Multivibrators.
FEATURES: Instrument comprises of DC Regulated Power Supply 5 VDC/150mA, 555 & various components kept inside the cabinet & connections brought out at 4mm sockets.



EMMI LAB
Apparatus to Study of Single Phase Energy Meter with Variac 10 Amps Single Phase, Loading Rheostat 2 KW Single Phase in 8 Steps of 250 Watt Each & other necessary arrangements to calibrate the meter.

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter – 300v
• Ammeter = 10a
• Wattmeter – 2000w
• Energy meter
• Resistive load 2kw
• Auto transformer 10a
Panel to measure Power & Power Factor in Single Phase Circuit with Variac 10 Amps Single Phase, Loading Rheostat 2 KW Single Phase in 8 Steps of 250 Watt Each, Capacitive Load 200mfd Single Phase in 20 Steps, Inductive Load 5Amp. Single Phase in 5 Steps & other necessary arrangements.

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter = 300v
• Ammeter = 10a
• Wattmeter = 2000w
• P.F meter
• Auto transformer 10a
• Resistive load 2kw
• Capacitive load
• Inductive load 5a
To Measure Power In 3 Phase Circuit Using 3 Phase Watt Meters, CT & PT With Loading Rheostat 3 KW Three Phase (Each Phase Of 1 KW) In 8 Step And Other Necessary Arrangements.

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter = 500v
• Ammeter = 10a
• Wattmeter = 2000w
• Loading rheostat 3kw
• C.T – 10/5
• P.T 415/110
Thyrister / IGBT Controlled AC Motor Drive with VVVF Controls with 3 Phase Induction Motor 2HP Fitted with Proximity Sensor & Control Panel fitted with Necessary Meters & AC Drive etc.

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter – 500v
• Ammeter – 5a
• Ac drive
• Induction motor 3 phase 2hp
• R.P.M meter
• Proximity sensor



IECD LAB
SCR CHARACTERISTICS APPARATUS
OBJECTIVE: To plot Anode current Vs Anode Cathode Voltage Characteristics. Gate Characteristics (Open Gate), Gate Characteristics (Gate connected).
FEATURES :Instrument comprises of two DC Regulated Power Supplies 0-30VDC/150mA & 0-5VDC/150mA, three round meters for voltage & current measurement, SCR TYN604 mounted behind the panel, connections of Supplies, Meters & SCR brought out at 4mm Sockets.



TRIAC CHARACTERISTICS APPARATUS
OBJECTIVE: To plot current and Voltage Characteristics of Triac
FEATURES :Instrument comprises of two DC Regulated Power Supplies 0-30VDC/150mA & 0-5VDC/150mA, three round meters for voltage & current measurement, TRIAC BT136 mounted behind the panel, connections of Supplies, Meters & TRIAC brought out at 4mm Sockets.



DIAC CHARACTERISTICS APPARATUS
OBJECTIVE: To study VI Characteristics of Diac.
FEATURES: Instrument comprises of DC Regulated Power Supply 0-50 VDC/150mA, two round meters for voltage & Current measurement, one Diac mounted behind the panel, connections of Supplies & Diac brought out at 4mm Sockets



UJT CHARACTERISTICS APPARATUS
OBJECTIVE: To plot V-I Characteristics & to measure interbase resistance.
FEATURES: Instrument comprises of Two DC Regulated Power supplies 0-15VDC/ 150mA & 0-25VDC/150mA, three round meters for voltage & current measurement, one UJT 2N2646 mounted behind the panel, connections of Supplies, Meters & UJT brought out at 4mm Sockets.
Light Intensity Control using SCR & Triac (Complete Setup)
DC Motor Control using SCR's (with tachometer)
SCR SINGLE PHAE HALF FULL CONTROLLED RECTIFIER.
Single Phase SCR Bridge Convertor / Universal AC/DC Motor Controller
Thyrister / IGBT Controlled AC Motor Drive with VVVF Controls

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter – 500v
• Ammeter – 5a
• Ac drive
• Induction motor 3 phase 2hp
• R.P.M meter
• Proximity sensor



Instrumentation Lab
WATER LEVEL MEASUREMENT TRAINER USING WATER LEVEL TRANSDUCER
SPECIFICATION
* Range : 0 to 100 mm.
* Display : 3 ½ digit LED.
* Resolution : 0.1 mm.
* Analog Output : 2 Volts, FSD.
* Power Source : 230V ±10%, 50Hz.
* Acrylic Jar with scale.
* Test point also provided.
* Complete with operational manual.

Experiments :
* To plot Water Level Vs. Digital Voltmeter reading.
* To plot Water Level Vs. Analog Voltmeter reading

TEMPERATURE MEASUREMENT TRAINER USING THERMOCOUPLE
SPECIFICATION
* Range : 0 to 100 º.
* Display : 3 ½ digit LED.
* Resolution : 0.1 ºC.
* Analog Output : 2 Volts, FSD.
* Power Source : 230V ±10%, 50Hz.
* Test point also provided.
* Complete with operational manual.

Experiments :
* To plot Temperature Vs. Digital Voltmeter reading.
* To plot Temperature Vs. Analog Voltmeter reading.
* To study of characteristics of Thermocouple

ANGULAR MEASUREMENT TRAINER USING ANGULAR SENSOR
SPECIFICATION
* Range : 0 to 350 º.
* Resolution : 1 ºC.
* Display : 3 ½ digit LED.
* Analog Output : 2 Volts, DC.
* Power Source : 230V ±10%, 50Hz.
* Analog sensor fitted in Angular Calibration Jig.

Experiments :
* To plot Angular Sensor Vs. Digital Voltmeter reading.
* To plot Angular Sensor Vs. Analog Voltmeter reading.

LONG RANGE MEASUREMENT TRAINER USING POTENTIOMETER TRANSDUCER
SPECIFICATION
* Range : 0 to 100 mm.
* Resolution : 1 mm.
* Display : 3 ½ digit LED.
* Analog Output : 2 Volts, FSD.
* Power Source : 230V ±10%, 50Hz.
* Long range sensor fitted on jig with scale.
* Test point also provided.
* Complete with operational manual.

Experiments :
* To plot Long Range Vs. Digital Voltmeter reading.
* To plot Long Range Vs. Analog Voltmeter reading.

DISPLACEMENT MEASUREMENT TRAINER USING LVDT
SPECIFICATION
* Range : 0 - +10mm to -10mm.
* Display : 3 ½ digit display
* Resolution : 0.1mm
* Excitation : 2 Volts RMS 5 KHz, Sine wave.
* Analog Output : 2 Volts FSD.
* Power Supply : 230V ±10%, 50Hz.
* Calibration Bench with 20mm micrometer.
* Test point also provided.
* Complete with operational manual.

Experiments :
* To study waveforms at different points.
* To plot Displacement Vs. Digital Voltmeter reading.
* To plot Displacement Vs. Analog Voltmeter reading.

STRAIN MEASUREMENT TRAINER USING STRAIN CANTILEVER BEAM
SPECIFICATION
* Range : 0 - 400.
* Display : 3 ½ digit display
* Resolution : 1 Microstrain.
* Excitation : 5 Volts DC.
* Analog Output : 2 Volts FSD.
* Power Source : 230V ±10%, 50Hz.
* Strain Cantilever beam past full bridge strain gauges with 4 Nos.
sliding weight of 250 gm.
* Test point also provided.
* Complete with operational manual.

Experiments :
* To plot Strain Vs. Digital Voltmeter reading.
* To plot Strain Vs. Analog Voltmeter reading.
* To plot Strain Vs. Strain cell signal.

LOAD MEASUREMENT TRAINER USING LOAD CELL
SPECIFICATION
* Range : 0 to 2 kg.
* Display : 3 ½ digit display
* Resolution : 0.01 kg.
* Excitation : 5 Volts DC.
* Analog Output : 2 Volts FSD.
* Power Source : 230V ±10%, 50Hz.
* With 2 Nos. of 1 Kg. weight
* Test point also provided.
* Complete with operational manual.

Experiments :
* To plot Load Vs. Digital Voltmeter reading.
* To plot Load Vs. Analog Voltmeter reading.
* To plot Load Vs. Load cell signal.

Lab Equipment
Basic electrical laboratory requirements as per the B.Tech new syllabus,2017.

Sl No

Name of experiment

Quantity

1

Determination of equivalent resistant of the resistors when they are connected in series, parallel and series parallel combinations.

01

2

Characteristics of fluorescent lamp

01

3

Characteristics of Tungsten filament lamps

01

4

Study of R-L-C Series and parallel circuit.

01

5

Measurement of energy (single and three phase using suitable energy meter

 

6

Star Delta starter for electrical machines.

 

RESISTANCE IN PARALLEL & SERIES
Object: To find the resultant resistance when resistance are connected in parallel.
Complete with one analog Round voltmeter & one analog round ammeter, external DC Regulated Power Supply terminals of 10V,500mA, Patch Cords & Manual







Lab Equipment
Panel For Angular Displacement Measurement Of Synchronous Motor With 3 Phase Synchronous Motor, DC Source With Control Panel Fitted With Necessary Meters, 2 No’s Of Variable Voltage DC Source & Other Necessary Arrangement.
Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Shunt motor 1HP
• Voltmeter 300
• Ammeter 5a
• Ammeter 1 a
• Dc source mounted on panel
• Rheostat 300ohm 1a, 100ohm 3a
• Digital RPM meter with proximity sensor.

Panel For Starting And Reversing Of DC Shunt Motor With DC Shunt Motor 1HP & Control Panel Fitted With Necessary Meters, Fixed Voltage DC Source And 3 Point DC Starter

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Shunt motor 1HP
• Voltmeter 300
• Ammeter 5a
• Reversing switch
• 3point starter
• Dc source mounted on panel

Panel For Calculation Of Parameter And Losses In A Single Phase Transformer By OC And SC Test With Built-In 1 Phase Transformer 500VA & Other Necessary Arrangements

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• 1phase transformer, input 220v, output 0-50%, 86%,100%.
• Voltmeter- 300v, 50v,
• Ammeter – 5a, 1a
• Wattmeter – 1000w, 250w
Panel For Working Out Voltage Relationship Of Three Phase Transformer In Various Connections With One 3 Phase Transformers 1KVA & Other Necessary Arrangements

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• 3phase transformer 1kw, input 0-415v, 0- 415, 0 – 415, out put 0-220v, 0 -220v, 0-220v
• Voltmeter 500v – 3
• Ammeter 2a – 3
• Autotransformer 3phase 5a
Loading Rheostat 1.5 Kw Three Phase (Each Phase Of 0.5 Kw) In 4 Steps

Specification:-
• angle frame box with dotted sheet
• Voltmeter 300v – 3
• Ammeter 5a – 3
• On/off switch – 4

Panel for Starting & Reversing the Direction of Rotation of a 1 Phase Induction Motor with 1 Phase Induction Motor (Capacitor Type) 1HP Fitted with Proximity Sensor Control Panel fitted with Necessary Meters ,DOL Starter ,Forward & Reverse Switch & Digital RPM Meter

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Capacitor motor 1hp
• Voltmeter – 300v
• Ammeter – 10a
• Reversing switch
• Digital rpm meter
• Proximity switch
• D.O.L starter

Panel For Speed Control Of 3 Phase Slip-Ring Induction Motor By Rotor Resistance Control With 3 Phase AC Slip-Ring Induction Motor 2HP Fitted With Mechanical Load Proximity Sensor , Rotor Resistance Starter & Control Panel Fitted With Necessary Meters , DOL Starter & Digital RPM Meter

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• slipring motor 2hp fitted on mechanical load with 2no dial balance of 25kg with pulley & belt
• voltmeter – 500v
• ammeter – 10a, 2a
• rotor starter
• wattmeter – 2000 watt
• D.O.L starter
• Digital rpm meter
• Proximity sensor

Panel For Block Rotor Test Of 3 Phase Induction Motor With Supplied With 3 Phase Induction Motor 3HP Fitted With Mechanical Load & Proximity Sensor Control Panel Fitted With Necessary Meters , DOL Starter & Digital RPM Meter

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Induction motor 3hp with mechanical load
• Voltmeter- 500v
• Ammeter – 5a
• Wattmeter – 1000w
• Digital R.P.M meter
• Proximity sensor
• D.O.L starter

Panel for drawing V & Inverted V Curves of a Synchronous Motor with Synchronous Motor 3HP,3 Phase Coupled with DC Shunt Generator 2KW & Control Panel fitted with Necessary Meters & DOL Strater

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• 3hp synchoronous motor coupled with 2kw shunt generator.
• D.O.L starter
• Voltmeter – 500v, 300v
• Ammeter – 2a, 10a, 5a
• Rheostat 300 ohm 2amp
• Lamp load 2kw

Panel for Synchronization and parallel operation of Two Alternator by two bright & one dark lamp method with 2 Set of DC Shunt Motor 2HP coupled with 3 phase AC Alternator 1KVA & Control Panel fitted with Necessary Meters, Variable Voltage Thyristoried DC Drives , Synchro-scope, Frequency Meter , Under/Over Voltage Relay & DC Excitation Source

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• 1kva synchronous generator coupled with 2hp.
• Shunt motor – 2
• Voltmeter – 500v = 2
 300v = 4
• Ammeter – 10a = 2
o 5a = 22
• Synchronoscope
• H.Z meter
• Dc drive – 2 • 3 point starter = 2
• Dc exiter = 2
• Lamp load

Panel for OC & SC Test of 3 Phase Synchronous Machine with DC Shunt Motor 2HP,220V Coupled with AC Alternator 1KVA,440V & Control Panel fitted with Necessary Meters, Fixed Voltage DC Source, 3 Point DC Starter & DC Excitation Source

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• 1kva synchronous generator coupled with 2hp shunt gen
• Voltmeter – 300v, 500v
• Ammeter 10a, 5a
• 3 point starter
• Rheostat 300ohm 2a
• Power factor meter

Panel to measure power & power factor of a 3 phase circuit by using two wattmeter method with Variac 4 Amps Three Phase ,Loading Rheostat 3 KW Three Phase
Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter = 500v
• Ammeter = 6a
• Wattmeter = 2000w
• Auto transformer 3 phase 5a
• Resistive load 3kw
• Capacitive load 3kw
• Inductive load 3kw

Panel to Plot the time current characteristics of over current relay

Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Voltmeter – 300v
• Ammeter – 5a
• Over current relay
• Loading rheostat 1kw
• Timer

Perform the overload and short circuit test of MCB
Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Auto transformer 4a
• Voltmeter - 300v
• Ammeter – 1a
• Load bank 1kw
• Timer

Plot the time-current characteristics of kit Kat fuse wire
Specification:-
• M.S Sheet powder coated panel with 5mm black bakalite sheet with MCB, Indicator, VM & AM.
• Auto transformer 4a
• Voltmeter - 300v
• Ammeter – 1a
• Timer
• Kit kat mounted on panel

Contact Details

Get Training From Company R & D Engineers Learn and make your own project By Yourself

ARMbedded Electronics Pvt. Ltd./ARMbedded CADD Centre

CIN No. - U72900HR2012PTC045008

GSTIN No. - 06AAKCA2004K1ZZ

Registered Office

446, Opposite Indraprastha Colony, Gate No. 1, Sonepat Road, Rohtak (HR) - 124001
+91 9728144460 , +91-7056744460

Jaipur Office

D 147, 3rd Floor, Behind Power House, Amrapali Circle, Vaishali Nagar, Jaipur
+91 9138168161 , +91-9887168161

Himachal Office

Ram Chowk, Kamla Market, Ghughr, Palampur
+91 9315146046

armbeddedindia@gmail.com, training@armbeddedindia.in

Facebook

Youtube

Google Plus

Pinterest